View Full Version : 835; Shells and Chokes
BamaBowHunter
02-13-2007, 03:06 PM
I got a Mossberg 835 and was just wondering what chokes are ya'll shooting out of this gun and also what ammo....
I have the stock choke that comes with 835 and recently bought a jellyhead for the 835... i have yet to pattern it, and was just wondering what loads worked well with gun/choke combo...
PAstringking
02-13-2007, 03:15 PM
i shoot the stock chock that came with the turkey barrel when i bought it....along with Winchester Supreme 3 1/2" 5shot.
i havent had a turkey run away after one of these shots!!
LifeNRA
02-13-2007, 08:23 PM
For my 835, I bought three chokes plus the factory choke, also got three different sizes of shot, #4, #5, and #6's. All three sizes were bought from Federal, and Winchester. I also bought two boxes of hevi-shot from Remington, #5, and #6's. 8 boxes of shells total!
Tested all the chokes I could with the hevi-shot first. Then went on to test the other three chokes with whatever I could shoot through. In my gun, it liked the Comp-N-Choke XXX Full, with Winchester Supremes HV 3.5" #6 the best at 40 yards! But that's my gun! Comp-N-Choke XXX FULL will not handle hevi-shot!
The process can and will be expensive! But you will never know what your gun is capable of shooting unless you go through the process! It helps if you have a few friends that have chokes to test on your gun. Also, buy a few rounds from them! Then head to the patterning board! Good luck!
I have the factory turkey choke. I use Rem 3" with #5 for 1st shot and and Winchester 3 1/2 with #6 for back ups.
It works for me. http://www.realtree.com/forums/images/graemlins/wink.gif
hunter336
02-15-2007, 02:45 AM
I use the Comp-N-Choke XXX Full w/ Winchester Xtended Range 3.5" #6. My gun also likes the Winchester Supreme HV 3.5" #5.
wiinchester supremes 3 and a half inch 5s in the stock choke that came with it. folded 2 of em up like a cheap umbrella at 50 yrds. I seen use in trying other chokes or loads...at what point are you killing ants with a sledge hammer?
Adjam5
02-15-2007, 11:38 AM
Congrats on the purchase, that gun will serve you well. I have had a 835 since about 90 and it is a BEAST. My workhorse gun. Like it soo much last week I bought another...all black and up to date from the factory.
I have had good sucess with " The Undertaker" choke tube which is non ported, killed alot of turkeys with it. Winchester supreme 3 1/2" #5's. I have since let my son use that gun and put in a Kicks ported choke.690 ( the earlier 835's weren't ported) so he could shoot he magnums with some relief. He nailed a big tom last year year with it , again using winchester supreme 3" #6's.
I have only used the factory tubes in modified and improved cyl. They do OK when shooting crows and other birds. In the field, Federal field loads 7 1/2's.
It took me a while to find out what worked best and for what. Good luck!
elnor
02-15-2007, 02:29 PM
Have any of you all had problems with your 835's sights?
I bought one turkey camo model 835 from Bass Pro Shops last fall and found the rear fiber optic sight loose when I opened the box at home. Nothing I've tried has tightened it down sufficiently, still wiggles.
I also found rust in the barrel upon getting it home. Considering sending back to Mossberg for work or replacement. I've cleaned it several times but still can't seem to get all of the rust out.
Any suggestions on the sights or rust would be greatly appreciated.
Adjam5
02-15-2007, 04:29 PM
I believe Tru -Glo makes the sights for Mossberg and they stand behind their products. Give them a e-mail and they should be able to help you.
My Mossberg 835 just went back to Mossberg in Texas to repair the safety which would not engage. While it's there, I am having them port it and install the current crop of fiber sights.
As far as rust...you should ZERO in a NEW gun. Talk to the store where you bought it, Bass pro should stand behind what they sell.
3whunt
02-16-2007, 03:38 PM
good luck with the gun. i hate my mossberg 835.
Gobblegobblebang
02-17-2007, 12:37 AM
Stock sights suck I use a scope with a KICKS .070 It kicks butt!!!!!!!!!
Brianxt
02-17-2007, 09:30 PM
I use the gobbling thunder .670 choke tube with 3 1/2 in wenchester 2 1/4 oz of #6
vBulletin® v3.8.4, Copyright ©2000-2010, Jelsoft Enterprises Ltd.