View Full Version : lack of pro shops
AllArmyoutdoorsSD
01-02-2005, 06:25 PM
I started shooting 3D archery when I was 12, I used a barrowed Martin. The guy that got me started was a proshop owner and he set everything up for me. I was only able to shoot for about a year and a half but was hooked. Now that I am back in the states and some what stable as far as deployments etc. I have gotten back into archery, I pretty much set my new bow up and was successful in this past years season for whitetail, but I wanted to run my set up by you all and see if I am set up ok or just lucky, I bought a PSE BabyG (NOT for beginners I know) durring the warm weather I shoot with a 65 lb draw when it got cold I dropped it down to 55 lbs. Now I am shooting Carbon Express CX 300 cut a t 27 inches and I shoot 125 grain Rocket Steel head mechanical broad heads, the reason reason I am shooting 125's is because I tuned my bow with 125 grain field points and didn't want to start over. I don't know all of the math and science of archery yet but I do know that if my target is within 35 yards my arrow will find its mark. Looking for suggestions comment and concerns thanks Justin
AllArmyoutdoorsSD
01-02-2005, 07:59 PM
Am I going to be in trouble when I start shooting 3D again. As far as my arrow goes? Like I said when I was shooting before Carbon was a dream.
AllArmyoutdoorsSD
01-02-2005, 09:07 PM
UH Draw length?? I had to put the arrow on my bow draw and mark where I needed to cut, When I set up the bow I had to draw and play with the stop and let off settings some. I just got it to the point where when at full draw I had a little bend in my arm and when I anhored it felt like I remember it should. I may be way off but I still shoot the nocks off at 30. I bought the bow used I am sure it built in the last 3 yrs as the original G force was in 01 or 02 I think. Any help is appreciated.
AllArmyoutdoorsSD
01-02-2005, 09:37 PM
The arrow at full draw rests one 1/2 in. in side the riser, basically my broad head is just foward of the rest by 1/2 in. I am guessing then I have a 27.5 draw length?
AllArmyoutdoorsSD
01-02-2005, 10:20 PM
Thanks I guess I am looking for reassurance, got to have confidence in your self and your equiopment. I am sure you will hear from me again. Thanks for the help!
vBulletin® v3.8.4, Copyright ©2000-2010, Jelsoft Enterprises Ltd.