Realtree Forums

Hunting Forum

Welcome to the hunting forum. Participate in member hunting forums, member blogs, and hunting pro blogs. The hunting forum is also the place to see Team Realtree photos and add your own photos.

We hope you’ll visit often! Why not bookmark this hunting forum page right now and share the link with a friend!

Hunting Forum | Realtree ® - Powered by vBulletin
Sign in with

+ Reply to Thread
Results 1 to 5 of 5
  1. #1
    AllArmyoutdoorsSD Guest

    Default lack of pro shops

    I started shooting 3D archery when I was 12, I used a barrowed Martin. The guy that got me started was a proshop owner and he set everything up for me. I was only able to shoot for about a year and a half but was hooked. Now that I am back in the states and some what stable as far as deployments etc. I have gotten back into archery, I pretty much set my new bow up and was successful in this past years season for whitetail, but I wanted to run my set up by you all and see if I am set up ok or just lucky, I bought a PSE BabyG (NOT for beginners I know) durring the warm weather I shoot with a 65 lb draw when it got cold I dropped it down to 55 lbs. Now I am shooting Carbon Express CX 300 cut a t 27 inches and I shoot 125 grain Rocket Steel head mechanical broad heads, the reason reason I am shooting 125's is because I tuned my bow with 125 grain field points and didn't want to start over. I don't know all of the math and science of archery yet but I do know that if my target is within 35 yards my arrow will find its mark. Looking for suggestions comment and concerns thanks Justin

  2. #2
    AllArmyoutdoorsSD Guest

    Default Re: lack of pro shops

    Am I going to be in trouble when I start shooting 3D again. As far as my arrow goes? Like I said when I was shooting before Carbon was a dream.

  3. #3
    AllArmyoutdoorsSD Guest

    Default Re: lack of pro shops

    UH Draw length?? I had to put the arrow on my bow draw and mark where I needed to cut, When I set up the bow I had to draw and play with the stop and let off settings some. I just got it to the point where when at full draw I had a little bend in my arm and when I anhored it felt like I remember it should. I may be way off but I still shoot the nocks off at 30. I bought the bow used I am sure it built in the last 3 yrs as the original G force was in 01 or 02 I think. Any help is appreciated.

  4. #4
    AllArmyoutdoorsSD Guest

    Default Re: lack of pro shops

    The arrow at full draw rests one 1/2 in. in side the riser, basically my broad head is just foward of the rest by 1/2 in. I am guessing then I have a 27.5 draw length?

  5. #5
    AllArmyoutdoorsSD Guest

    Default Re: lack of pro shops

    Thanks I guess I am looking for reassurance, got to have confidence in your self and your equiopment. I am sure you will hear from me again. Thanks for the help!

Similar Threads

  1. lack security on planes
    By huntinsanobsession in forum Lounge
    Replies: 2
    Last Post: 08-18-2006, 11:01 AM
  2. Lack of TRUST
    By VermontHunter in forum NASCAR and Sports
    Replies: 10
    Last Post: 02-21-2006, 06:31 PM
  3. Lack of practice ticks me off!
    By antlers21 in forum Bowhunting
    Replies: 12
    Last Post: 10-14-2005, 01:08 PM
  4. Peep, or lack there of.
    By JimT in forum Bowhunting
    Replies: 2
    Last Post: 02-05-2005, 09:31 PM
  5. 30-06 Penatration (or lack of)
    By OJR in forum Rifles & Accessories
    Replies: 19
    Last Post: 11-16-2004, 03:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts